Wound filter element Overview: spiral wound filter element is a deep filter element, for low viscosity, low impurity content filtering, she is a textile fiber strand (c perish wire, cotton thread, glass fiber cable) according to various specific The way the inner core (PP, or stainless) entwined on. Mainly used in thermal power plant condensate polishing, filtration, plating liquid, chemical liquid, oil filters for industrial use. Condensate filter filter element, PP wound self-supporting, bottom threaded connection Type Length ALDFG HL-CR-60-P 60 "1518 1638 50 1.5" -12um 28 HL-CR-70-P 70 "1778 1898 50 1.5" -12um 28 HL-CR-80-P 80 "2009 2129 50 1.5" -12um 28 millimeters size pressure in bar u HL-CR-60-P flow (l / h) 1U 5U 10U 1000 0.01 0. 01 0 2000 0.1 0.09 0.08 3000 0.25 0.24 0.22 4000 0.45 0.43 0.4 u HL-CR-70-P flow rate (liters / hr) 1U 5U 10U 1000 0.01 0.01 0 2000 0.09 0.08 0.07 3000 0.23 0.22 0.21 4000 0.41 0.4 0.39 u HL-CR-80-P flow rate (liters / hr ) 1U 5U 10U 1000 0.01 0.01 0 2000 0.08 0.07 0.06 3000 0.22 0.21 0.28 4000 0.4 0.39 0. 38: 1. Application for condensate polishing systems, change the filter element suitable type flow value 2.8-3.2m3 / h (70 英寸 filter element) 2. Backwash water vapor pressure: pressure ~ 3bar 3. backwash water intensity: . ~ 0.22Nm3 / h root 3. gas backwashing strength:. ~ 1.1Nm3 / h root illustrated filter element can be screwed in in the end plate, this filter element comprises a high-strength stainless steel self-supporting skeleton. The thickness of the stainless steel tube bore is 1 to 2 mm. Filtration accuracy can be 5, 10 or 20 microns. The bottom of the thread can be manufactured in accordance with the requirements specification through the M33 × 1.5, M33 × 2, × 24, × 12.