Condensate filter filter element, wound polypropylene, need support, bottom no connection. Model ALDG HL-CR-60-P 1518 1638 50 28 HL-CR-70-P 1778 1898 50 28 HL-CR-80-P 2009 2129 50 28 pressure is measured in millimeters size bar of pressure at different flow rates: u HL-CR-60-P flow rate (liters / hr) 1U 5U 10U 1000 0.01 0.01 0 2000 0.1 0.09 0.08 3000 0.25 0.24 0.22 4000 0.45 0. 43 0.4 Description: 1. Application for condensate polishing systems, change the filter element suitable type of flow is 2.8-3.2m3 / h (70 英寸 filter element) 2. Backwash water vapor pressure: pressure ~ 3bar 3. Water Reversed Wash strength: ~ 0.22Nm3 / h root 4. gas backwashing strength:.. ~ 1.1Nm3 / h root illustrated filter element must have the appropriate support with adapter to adapt the blade-like connection. It bore tube 1 to be 2 mm polypropylene or stainless steel. This filter element filter pore size can be 5, 10, or 20 microns. , Jiangsu-edge technology wound filter element Description: Condensate filter filter element, wound polypropylene, need support, bottom no connection. Model ALDG HL-CR-60-P 1518 1638 50 28 HL-CR-70-P 1778 1898 50 28 HL-CR-80-P 2009 2129 50 28 pressure is measured in millimeters size bar of pressure at different flow rates: u HL-CR-60-P flow rate (liters / hr) 1U 5U 10U 1000 0.01 0.01 0 2000 0.1 0.09 0.08 3000 0.25 0.24 0.22 4000 0.45 0. 43 0.4 Description: 1. Application for condensate polishing systems, change the filter element suitable type of flow is 2.8-3.2m3 / h (70 英寸 filter element) 2. Backwash water vapor pressure: pressure ~ 3bar 3. Water Reversed Wash strength: ~ 0.22Nm3 / h root 4. gas backwashing strength:.. ~ 1.1Nm3 / h root illustrated filter element must have the appropriate support with adapter to adapt the blade-like connection. It bore tube 1 to be 2 mm polypropylene or stainless steel. This filter element filter pore size can be 5, 10, or 20 microns. , Jiangsu-edge technology wound filter element Description: Condensate filter filter element, wound polypropylene, need support, bottom no connection. Model ALDG HL-CR-60-P 1518 1638 50 28 HL-CR-70-P 1778 1898 50 28 HL-CR-80-P 2009 2129 50 28 pressure is measured in millimeters size bar of pressure at different flow rates: u HL-CR-60-P flow rate (liters / hr) 1U 5U 10U 1000 0.01 0.01 0 2000 0.1 0.09 0.08 3000 0.25 0.24 0.22 4000 0.45 0. 43 0.4 Description: 1. Application for condensate polishing systems, change the filter element suitable type of flow is 2.8-3.2m3 / h (70 英寸 filter element) 2. Backwash water vapor pressure: pressure ~ 3bar 3. Water Reversed Wash strength: ~ 0.22Nm3 / h root 4. gas backwashing strength:.. ~ 1.1Nm3 / h root illustrated filter element must have the appropriate support with adapter to adapt the blade-like connection. It bore tube 1 to be 2 mm polypropylene or stainless steel. This filter element filter pore size can be 5, 10, or 20 microns.